Fandom

VroniPlag Wiki

Analyse:By/Fragment 010 24

31.377Seiten in
diesem Wiki
Seite hinzufügen
Diskussion0

Störung durch Adblocker erkannt!


Wikia ist eine gebührenfreie Seite, die sich durch Werbung finanziert. Benutzer, die Adblocker einsetzen, haben eine modifizierte Ansicht der Seite.

Wikia ist nicht verfügbar, wenn du weitere Modifikationen in dem Adblocker-Programm gemacht hast. Wenn du sie entfernst, dann wird die Seite ohne Probleme geladen.


Typus
KomplettPlagiat
Bearbeiter
Graf Isolan
Gesichtet
Yes.png
Untersuchte Arbeit:
Seite: 10, Zeilen: 24-37
Quelle: Blatz et al 2003
Seite(n): 272, Zeilen: left col. 21-42
Adhesive cementation may not be required for final insertion of high-strength all-ceramic restorations with proper mechanical retention. However, some clinical situations and restorative treatment options mandate resin bonding and adequate ceramic-surface conditioning. Preferred treatments for glass-infiltrated aluminum-oxide ceramic are either airborne particle abrasion with Al2O3 (50 to 110 μm at 2.5 bar) and use of a phosphate-modified resin cement (Panavia 21) or tribochemical surface treatment (Rocatec System) in combination with conventional Bis-GMA resin cement. The small number of long-term in vitro studies on the bond strength to densely-sintered aluminum-oxide ceramic does not allow for clinical recommendations. The few available studies on resin bonding to zirconium oxide ceramics suggest the use of resin cements that contain special adhesive monomers. Compared with silica-based ceramics, the number of in vitro studies on the resin bond to high-strength zirconia ceramics is small. The rapidly increasing popularity of all-ceramic systems requires further investigation of resin-zirconia ceramic bonding. Adhesive cementation may not be required for final insertion of high-strength all-ceramic restorations with proper mechanical retention. However, some clinical situations and restorative treatment options mandate resin bonding and, therefore, adequate ceramic-surface conditioning. Preferred treatments for glass-infiltrated aluminum-oxide ceramic are either airborne particle abrasion with Al2O3 (50 to 110 μm at 2.5 bar) and use of a phosphate-modified resin cement (Panavia 21) or tribochemical surface treatment (Rocatec System) in combination with conventional Bis-GMA resin cement. The small number of long-term in vitro studies on the bond strength to densely-sintered aluminum-oxide ceramic does not allow for clinical recommendations. The few available studies on resin bonding to zirconium-oxide ceramics suggest the use of resin cements that contain special adhesive monomers. Compared with silica-based ceramics, the number of in vitro studies on the resin bond to high-strength ceramics is small. The rapidly increasing popularity of all-ceramic systems requires further research.
Anmerkungen

Nothing has been marked as a citation.

Sichter
(Graf Isolan) Schumann

Auch bei Fandom

Zufälliges Wiki